PPE AND CE APPROVAL, WHY?

If the acronym PPE doesn't mean anything to you yet, what follows should help you see things more clearly, and understand the challenge and commitments of Wildust, in the development of its range of approved PPE.... Because yes, “Personal Protective Equipment” is equipment for the motorcyclist, the characteristics of which have been tested in the laboratory to meet the requirements of European standards for Motorcycle Protection. Once the tests have been validated, an approval certificate is issued,

Currently, only helmets and gloves require mandatory certification. Jackets and pants, although not yet covered, are directly exposed in the event of a fall and undoubtedly require an appropriate level of protection.

These devices, not governed by a "legal" obligation, can vary in terms of effectiveness and protection, and it's best to be careful, because not all equipment is equal. Only CE certification can guarantee certain standards and ensure "standardized protection within a legal framework." We'll explain how.

homolog.png

LES DIFFERENTS NIVEAUX D'HOMOLOGATION

La certification CE classe les vêtements de protection moto en plusieurs niveaux, en fonction de leur résistance aux conditions extrêmes :

  • Classe B : Protection de base, sans renforts contre les chocs. À porter avec des protections internes.
  • Classe A : Protection légère, adaptée à une utilisation urbaine ou par temps chaud. Matériaux plus souples, résistance à l’abrasion limitée.
  • Classe AA : Compromis entre protection et confort, idéal pour les trajets quotidiens et les longues balades.
  • Classe AAA : La protection la plus élevée, pensée pour la piste et les routes à haute vitesse. Résistance maximale, matériaux plus rigides.

WHAT DOES “CE APPROVED PRODUCT” MEAN?

Having CE-approved or certified equipment guarantees that your gear has passed a series of demanding tests to meet European safety standards. Without this certification, it's impossible to know if your protection will provide real safety on the road. So, what are these tests and why are they so important?

ABRASION RESISTANCE TESTS

ABRASION RESISTANCE TESTS

When you fall off your motorcycle, your gear will rub against the asphalt. The abrasion resistance test simulates sliding on the road at different speeds to measure how long it takes for the material to break through. The more resistant it is, the better.

SEAMSTRENGTH TESTS

SEAMSTRENGTH TESTS

Use this text to describe products, share details on availability and style, etc.

TEAR STRENGTH TESTS

TEAR STRENGTH TESTS

This test checks the fabric's ability to resist tearing under sudden traction. It is performed in multiple directions (warp and weft) to ensure that the material will not break, regardless of the stress it is subjected to.

SHOCK ABSORPTION TESTS

SHOCK ABSORPTION TESTS

Impact protection is essential for protecting joints in the event of an impact. This test measures the effectiveness of reinforcements placed on the elbows, shoulders, knees, and hips by assessing their ability to absorb impact energy. Good PPE should minimize the force transmitted to the body.

ERGONOMICS TESTS

ERGONOMICS TESTS

PPE is subject to additional checks: dimensional stability (preventing the equipment from deforming over time), comfort, ergonomics, etc. Effective equipment also means equipment that you can wear every day without restriction.

CHEMICAL TESTS

CHEMICAL TESTS

They guarantee that the materials used in clothing do not pose any health risks when in prolonged contact with the skin. They are non-toxic.

The laboratories check in particular: The presence of prohibited substances (phthalates, chromium VI, azo dyes or nickel)

TESTED AND APPROVED MATERIALS

For a long time, motorcyclists had to choose between riding in style and riding safely. Protective gear was often rigid, heavy, and unattractive, which discouraged many from wearing it. But today, thanks to innovative materials, it's finally possible to combine maximum safety with stylish aesthetics.

No more compromises, just the best of both worlds.

The safety of motorcycle gear depends primarily on the choice of materials. Some fabrics are specifically designed to offer high resistance to abrasion and impact, while ensuring comfort and flexibility. We make it a point of honor to select textiles that meet the most demanding criteria.

Every material used in our products is selected and tested to ensure the right balance between protection and comfort, so that riding is both safe and enjoyable.

Nos vestes et pantalons répondent aux exigences strictes de la norme EN 17092, tandis que nos gants sont conformes à la norme EN 13594. Ces certifications garantissent que nos produits respectent les standards de sécurité imposés par l’Union européenne.

DES MATERIAUX TESTÉS ET APPROUVÉS

Longtemps, les motards ont dû choisir entre rouler avec style ou rouler en toute sécurité. Les équipements de protection étaient souvent rigides, lourds et peu esthétiques, ce qui en dissuadait plus d’un de les porter. Mais aujourd’hui, grâce aux matériaux innovants, il est enfin possible d’allier sécurité maximale et esthétique soignée.

Plus de compromis, juste le meilleur des deux mondes.

La sécurité d’un équipement moto passe avant tout par le choix des matériaux. Certains tissus sont spécifiquement conçus pour offrir une résistance élevée à l’abrasion et aux chocs, tout en garantissant confort et flexibilité. Nous mettons un point d'honneur à sélectionner des textiles répondant aux critères les plus exigeants.

Chaque matière utilisée dans nos produits est sélectionnée et testée pour garantir le bon équilibre entre protection et confort, afin que rouler soit à la fois sûr et agréable.

FULL GRAIN COWHIDE LEATHER

FULL GRAIN COWHIDE LEATHER

Full-grain cowhide: Historically used for motorcycle gear, it remains a benchmark in terms of abrasion resistance. Thick and durable, it offers natural protection and great longevity.

COTTON AND WEAVED TEXTILES

COTTON AND WEAVED TEXTILES

Technical fibers: Kevlar, Cordura, Dyneema, and Superfabric are innovative materials used in certain equipment to reinforce the most exposed areas in the event of a fall. These fabrics are designed to withstand the high temperatures generated by friction on asphalt.

This is the end of the compromise between STYLE and SAFETY."

I want to make protective clothing that doesn't look like motorcycle gear."

So that we can wear them when we ride but also when we don't ride."

CLEAR LABELING, A UNIQUE GUARANTEE

Never trust the product's outward appearance. Some equipment may appear armed without actually being approved, and others (like ours) cleverly hide the disadvantages related to approval. How many of you have already said to us: "That's pretty, but it's not approved!"... Because in the common imagination, what is technical is necessarily "ugly"!
There's only one religion: Labeling! If your product has a CE-marked sewn-in label (lining) with the pictogram of the current standard, then it's good! The product must also have an external label specifying its qualification and level of approval, as well as a technical notice on the product.

Without these two elements, you can move on!